DataCard UltraGrafix Select Installationshandbuch PDF herunterladen (Seite 280)

268 ConCAD

Processing Tab

This tab is common to all elements in a laser template.

•

Horizontal axis

• Vertical axis(MX6000)

• No Tilting (default) - If “No Tilting” is set the track

bar will be disabled.

• Lase element further away from beamtrain

• Lighter image

• Larger laser dots

• Blurry

• Lase element closer to beamtrain

• Lighter image

• Smaller laser dots

• “Pixel” appearance

• Burning

• Gray areas outside of bitmap areas

• Lines in images

Tilting Axis/Angle The direction and degree to which the product is

angled during element lasing. Values:

Note: Tilting is used for lasing special lens structures.

Process Distance If a process distance other than 0 is chosen, the

product gets lased out of the defined laser working

plane (distance of the product from the laser beam

train).

By using this, you can lase an element either further

away from (process distance > 0) or closer to (process

distance < 0) the beam train.

This has several effects on the appearance of the lased

object, depending on other settings and the actual

material behavior.

Process distance > 0

Process distance < 0

Range: -

30 to 30

Pixel Repetition Laser pulse repetition at every pixel multiple times. The

result is a much darker mark. Generally should not be

used.

Range: 1 to 4294967295

Reset All Sets the default values for all three properties.

1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 321 322

Keine Kommentare

DataCard UltraGrafix Select Installationshandbuch Seite 280