DataCard UltraGrafix Select Installationshandbuch PDF herunterladen (Seite 251)

Maxsys and MX Series Software Administrator’s Guide 239

Vision Registration

Some card stocks are designed with tight tolerances for areas that are meant to be

personalized at production time. Card stock manufacturing processes may allow

for some variation in the location of these areas. If personalization elements are

not adjusted when pre-printing moves, the finished card can appear badly

designed or badly printed.

You can use the vision registration feature of the Vision Verification module to

identify shifts in pre-printed areas and adjust the personalization elements to

compensate for those shifts. Then personalized data will appear as the card

designer intended.

Vision Registration Procedure

1. Create a Card Stock Setup with a pattern match. (See “Procedure” on

page 230.)

2. Create a Card Setup:

A. From the menu bar select Applications | Setups | Card Setup.

B. Click New on the toolbar.

C. For Stock Name, select the Card Stock Setup you created in step 1.

D. From the element list, select Text Element and then click in the card. See

“Text Element” on page 103 for complete information on creating a text

element.

E. On the Vision Verification tab, select Use Printing Offset and then select

the name of the pattern match defined in the Card Stock Setup.

F. Save the Card Setup.

When the Card Setup is used in production, the Vision Verification module

locates the pattern match element on each card; determines whether the element

is in the location expected; and if adjustments are required, shifts the X and Y

locations of each personalization element as necessary.

Verifying Correct Personalization

When a Vision Verification module is placed after personalization modules, you

can use it to verify that the card was personalized correctly.

Verify Correct Personalization

1. From the menu bar select Applications | Setups | Card Setup.

1 2 ... 246 247 248 249 250 251 252 253 254 255 256 ... 321 322

Keine Kommentare

DataCard UltraGrafix Select Installationshandbuch Seite 251