DataCard UltraGrafix Select Installationshandbuch PDF herunterladen (Seite 113)

Maxsys and MX Series Software Administrator’s Guide 101

Image Element

Use the following information to define the properties of an Image Element.

Settings Tab Properties

Name The name of the Image Element

Side The side of the card (Front or Back) on which the operation is

to occur

X/Y The horizontal and vertical coordinates (measured from the

bottom-left corner of the card) at which the operation is to

occur. Click the icon to use Data Field information for the X

and Y coordinates or click the icon to select Data Field, or

Image Position (for when the position will come from color A

and B header data) information for this operation.

Image File The graphic image file to be used in the operation. Click

Browse to navigate to the file’s location. Click the icon to

select Data Field, Feedback Field, or Runtime Composite

information for this operation.

Print Technology The technology type (Monochrome Mass Transfer, Color D2T2,

Retransfer)

Graphics Ribbon/

Ribbon Set

(Retransfer)

The ribbon stock to be used in the operation. This selection

should correspond to the selected Print Technology

When Monochrome Mass Transfer is used, then select a

graphics ribbon from the list or click the icon to select Data

Field, Feedback Field, or Runtime composite information for

this operation.

When Color D2T2 is used, then select the D2T2 color ribbon

from the list.

When Retransfer Print Technology is selected, this property

changes to Ribbon set and the Print Process and Settings

button will be enabled.

Print Process/

Settings

The process used in the printing operation for Retransfer print

technology. The Settings button is also enabled.

The Setting for CMYK process is Use Color Table and/or

preserve CMYK.

The Settings for CMYK Spot Color are: 600/1200 DPI, Y Offset,

and Gray Scale Enabled.

Z-Order Sets the front to back order of elements on the Z axis. Zero (0)

represents the farthest “back” an image can be. For example

if you want image B to overlap image A, image A’s Z-Order

value would be 0 and image B’s value would be 1.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 321 322

Kommentare zu diesen Handbüchern

Keine Kommentare

DataCard UltraGrafix Select Installationshandbuch Seite 113

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Etikettendrucker DataCard UltraGrafix Select