DataCard UltraGrafix Select Installationshandbuch PDF herunterladen (Seite 115)

Maxsys and MX Series Software Administrator’s Guide 103

Text Element

Use the following information to define the properties of a Text Element.

Scale Select the check box, and then click Modify to scale the

image.

You can manually insert Height and Width values based on

the physical size or percentage of the size of the image. Click

the Proportional by Width/Height check boxes to have the

image adjust proportionally based on the Height or Width

value you enter. Click one of the shortcut buttons to fill in the

percentage values for the width and height based on the dpi

conversion.

Click the icon to select Data Field information for this

operation.

Element Group Element Groups allow you to split graphic/text/Barcode

element operations between multiple devices. This is done to

improve throughput.

Preceding

Operations

Click Add/Modify to open the dialog from which you can

select the operation(s) to occur before this operation. Use the

arrows to move the operations from one column to the other.

Vision Verification Tab Properties

Use Printing Offset Select the Card Stock Setup to use the printing offset defined

there. This will ensure that images are centered within the

area as defined in the pattern match.

Quality Check Enter the Pass Threshold value for the Card Stock Setup used

for the Printing Offset above.

Choose the Element Filter value from the list or click the icon

to use Data Field information.

Intensity (default) the color image is converted to a

grayscale image and vision verification is done with that

image. When Red/Green/Blue are selected, the camera will

filter for the selected color channel from the RGB color space

and covert the filtered image to grayscale for use in vision

verification.

Settings Tab Properties

Name The name of the Text Element

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 321 322

Keine Kommentare

DataCard UltraGrafix Select Installationshandbuch Seite 115