DataCard RL90 Betriebsanweisung PDF herunterladen (Seite 50)

Printer error recovery

44 RP90 and RL90 User Guide

Bend remedy

Single-sided printing can cause the card to warp depending on the type of

cards you use. Use the bend remedy Temp Level settings to correct the

condition and use the Speed settings to fine tune the adjustment.

Bend remedy printer settings

1 Press the printer's MENU key

until "Bend Remedy" is

displayed.

2 Press the ENTER key. There

are three bend remedy

settings to choose from. Use

the up and down arrow keys

to select "Temp Level",

"Speed", or "Cooling Time".

a Temp Level

Use the up and down

arrow keys to set the bend

remedy roller

temperature. There are

seven settings: off and -5

to 0. The higher the value,

the higher the

temperature. Press the

ENTER key to confirm the

value. Press the RESET

and then the ENTER key

to initialize the printer.

b Speed

Use the up and down arrow keys to set the bend remedy roller

speed. There are five settings from -2 to +2; the higher the value,

the faster the speed. Press the ENTER key to confirm the value.

Press the RESET and then the ENTER key to initialize the printer.

c Cooling Time

Set the cooling time from zero to 15 seconds using the up and

down arrow keys. Press the ENTER key to confirm the value.

Press the RESET and then the ENTER key to initialize the printer.

Tips –Bend Remedy

• You must initialize the

printer by pressing the

RESET and then the

ENTER key. Settings will

not be saved if the

printer is not initialized.

• Double-sided printing

with the Temp Level set

to a high temperature

can cause severe

warping. Set the Temp

Level to OFF when

printing on both sides of

the card.

• Allow sufficient time for

the bend remedy roller to

cool after decreasing the

temperature setting.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 74 75

Kommentare zu diesen Handbüchern

Keine Kommentare

DataCard RL90 Betriebsanweisung Seite 50

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Multifunktionsgeräte DataCard RL90