DataCard RL90 Betriebsanweisung PDF herunterladen (Seite 40)

Cleaning the printer

34 RP90 and RL90 User Guide

Magnetic head

When printing magnetic stripe cards, the magnetic head should be cleaned

every 1,000 cards. If you are not using magnetic stripe cards, the magnetic

head does not require cleaning.

1 Move the RL90 laminator (if

installed) away from the printer

to avoid a card jam during the

cleaning process.

2 Open the card hopper and

remove cards.

3 Press the MENU key until

"Cleaning" is displayed.

4 Press ENTER and use the up

and down arrow keys to select

"MG Head."

5 Place three or four drops of

isopropanol on the stripe of the

magnetic head cleaning card.

6 Place the magnetic head

cleaning card in the card

hopper in the correct

orientation for the type of cards

used. See

“Load cards” on

page 8

for proper card

orientation.

7 Close the card hopper and

press the ENTER key on the

LCD panel.

8 When the cleaning card is

discharged, power off the

printer, wait ten seconds, and

power back on.

Tips –Magnetic head

cleaning card

• Replace the magnetic

head cleaning card when

it becomes dirty. Using a

dirty magnetic head

cleaning card can

damage the magnetic

head.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 74 75

Kommentare zu diesen Handbüchern

Keine Kommentare

DataCard RL90 Betriebsanweisung Seite 40

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Multifunktionsgeräte DataCard RL90