DataCard RL90 Betriebsanweisung Seite 32
- Seite / 75
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Using the LCD menus
26 RP90 and RL90 User Guide
Printer LCD panel
Menu Display Settings Function
Display Counter
• Total
• Head
•Free
Use the up and down arrow keys to select the card counter type:
• Total, the printer’s default setting, displays the number of
cards printed. The Total counter cannot be reset.
• Head displays the number of complete dye panels. The
Head counter cannot be reset, however, it automatically
resets itself when the print head is replaced.
• The Free counter displays the number of cards that have
printed. The Free counter can be reset by the user.
Contrast
0
Set the LCD panel contrast using 7 gradations from
-3 (low contrast) to +3 (high contrast). The default setting is 0.
Back Color
SKY BLUE
Choose from eight LCD background colors. Sky blue is the
default color. Other selections are blue, light blue, green,
bright green, yellow, purple, and pink.
Counter Reset OK? Press ENTER to reset the Free counter.
Cleaning Rollers
OK?
Magnetic Stripe Head
Enter the cleaning function to clean the card feed and heated
rollers, and to clean the magnetic head when using magnetic
stripe cards. See
“Heat roller” on page 33
or
“Magnetic head”
on page 34
for the steps to follow.
Ink Ink Type
YMCK: 0
YMCK+PO: 2
YMCKK: 4
Select the type of ink ribbon that is loaded in the printer.
Datacard supports YMCK and YMCKK ink ribbons; YMCK+PO
is not available at this time. Initialize the ink ribbon after making
changes as described in
“Initialize the ink ribbon” on page 16
.
Black level Choose from seven gradations from -3 (lighter) to +5 (darker).
Black mode Choose Standard or Fine. Change to Fine if thin lines or small
black text is blurred.
SP - Ink1 Level Use SP - Ink1 and Ink2 levels to set the darkness level of
special inks that will be available in the future.
SP - Ink2 Level See SP -Ink1 Level above.
Retransfer Media type Choose from three types: 1000, 250, or 750 frames per roll.
Datacard retransfer ribbon is available in 1000 frames per roll.
Temp Level Set the retransfer roller temperature. Set from -5 (lower) to +2
(higher).
Speed (front)
Set the retransfer speed for the front of the card. Set from -2
(slower) to +2 (faster). Initialize the retransfer film after making
changes. See
“Initialize the retransfer film” on page 17.
Speed (back) Set the retransfer speed for the back of the card. Set from -2
(slower) to +2 (faster).
Initialize the retransfer film after making
changes. See
“Initialize the retransfer film” on page 17.
MG Print (JIS) Select ON or OFF.
- User guide 1
- Regulatory compliance 2
- Trademark acknowledgments 2
- Proprietary Notice 2
- Contents 3
- RP90 and RL90 User Guide v 5
- Liability statement 6
- Introduction 7
- About the Printer 8
- The inside of the printer 9
- The back of the printer 10
- About the Laminator 11
- Using the printer 13
- Load Supplies 14
- Load ink ribbon 15
- Load retransfer film 16
- Load laminate 17
- Power on 18
- Optional laminator connection 19
- Power on the laminator 20
- Power on the printer 21
- Prepare to print cards 22
- Set the retransfer film type 23
- Printing cards 24
- Print from a PC application 25
- Viewing and changing 27
- Printing Preferences 28
- Printing Properties 29
- Using the LCD menus 30
- RP90 and RL90 User Guide 25 31
- Printer LCD panel 32
- RP90 and RL90 User Guide 27 33
- Laminator 34
- Laminator LCD panel 35
- Taking care of your printer 37
- Cleaning the printer 38
- Heat roller 39
- Magnetic head 40
- Thermal head 41
- Printer fan filters 41
- Cleaning the laminator 42
- Laminator fan filter 43
- Messages 45
- Printer error recovery 46
- Turnover jam 47
- Retransfer section jam 48
- Bend remedy 50
- RP90 and RL90 User Guide 45 51
- Printer LCD messages 52
- RP90 and RL90 User Guide 47 53
- RP90 and RL90 User Guide 49 55
- Laminator error recovery 56
- RP90 and RL90 User Guide 51 57
- Laminator LCD messages 58
- RP90 and RL90 User Guide 53 59
- Supplies 61
- Ink ribbon 62
- Retransfer film 62
- Laminator material 62
- Cleaning supplies 63
- Site requirements 65
- Site guidelines 66
- Ventilation clearance 67
- Printer specifications 68
- Laminator specifications 69
- Compliance (FCC) 71
- RP90 and RL90 User Guide 67 73
- 11111 Bren Road West 75
- Minnetonka, MN 55343-9015 75
- 952.933.1223 75
- 952.933.7971 FAX 75
Verwandte Produkte und Handbücher für Multifunktionsgeräte DataCard RL90
(30 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.041 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern