DataCard RL90 Betriebsanweisung PDF herunterladen (Seite 49)

Printer error recovery

RP90 and RL90 User Guide 43

Mending broken ink ribbon or retransfer film

If the ink ribbon or retransfer film breaks, “Media Broken” will be displayed on

the LCD panel. Broken ink ribbon is shown in the following example; repairing

broken retransfer film follows the same steps.

1 Slide the door latch to the right

and open the printer door.

2 Remove the cartridge by

pressing the cartridge eject

button.

3 Trim the ends of the broken

portions evenly.

4 Do not remove the used ink

ribbon or film from the take-up

spool.

5 Align the ends of the broken

media evenly and apply tape

to secure.

6 Turn the take-up spool

clockwise until the mended

portion is wound onto the

spool two or three turns.

7 Reinstall the cartridge into the

printer until it clicks into

position.

8 Close printer door.

9 Initialize the ribbon or film as

described in

“Initialize the ink

ribbon” on page 16

“Initialize the retransfer film”

on page 17

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 74 75

Keine Kommentare

DataCard RL90 Betriebsanweisung Seite 49