DataCard ImageCard Select Betriebsanweisung Seite 81
- Seite / 110
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
User’s Guide for Express™ and Select™ Printers
A
A
Safety and compliance
This appendix presents:
• Regulatory compliance information
• Safety information
• Trademark acknowledgments
Regulatory compliance
Notice for USA (FCC notice)
This equipment generates, uses, and can radiate radio frequency energy. If it is not
installed and used in accordance with this instruction manual, it may interfere with
radio communications. This equipment has been tested and found to be within the
limits for Class A computing devices, pursuant to Subpart J of Part 15 of FCC rules,
designed to provide reasonable protection against radio interference in a commercial
environment. Operation of this equipment in a residential environment may possibly
cause interference. In the event of interference, the user, at their own expense, will be
required to take whatever measures are necessary to correct the problem.
Notice for Canada (CSA)
This digital apparatus does not exceed the Class A limits for radio noise for digital
apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les
limites applicables aux appareils numériques de la classe A prescrites dans le
Règlement sur le brouillage radioélectrique édicté par le ministère des
Communications du Canada.
Notice for Europe
We hereby certify that the Datacard® Express™ or Select™ Class photo ID printer
complies with EMC Directive 89/336/EEC.This printer conforms to Class A of EN
55022. Operation of this equipment in a residential environment may possibly cause
interference. In the event of interference, the user, at their own expense, will be
required to take whatever measures are necessary to correct the problem.
Notice to Users of Printers Equipped with Contactless Smart
Card Coupler
The contactless smart card coupler emits radio-frequency waves and must be used as
installed and recommended by Datacard, the printer manufacturer. You may not
modify the coupler or how it is used without the written permission of Datacard. You
may not operate the printer after modifying the coupler or its method of operation.
- ImageCard® and 1
- UltraGrafix® Series 1
- User’s Guide for 1
- Express™ and Select™ 1
- Class Printers 1
- Liability statement 2
- Regulatory compliance 2
- Trademark acknowledgments 2
- Proprietary Notice 2
- Contents 3
- Overview 6
- About this manual 7
- Audience 7
- Printer features 9
- Front of the printer 10
- Inside the printer 11
- Back of the printer 13
- Getting started 15
- Selecting the site 16
- Unpacking the printer 17
- Who to call for assistance 18
- Connecting the printer 18
- Loading cards 20
- Loading the print ribbon 21
- Ribbon take-up 22
- Ribbon supply 22
- Load the print ribbon 23
- Powering on the system 24
- Installing the printer driver 25
- Setup tips 28
- Make a Printer test card 29
- Printer test card 30
- Print the Windows test page 31
- Microsoft 32
- Using the printer 33
- Use the Properties dialog box 34
- Using the Status Monitor 37
- Exiting the Status Monitor 39
- Making cards 40
- Removing cards 41
- Responding to messages 42
- Shutting down the system 43
- Maintaining the printer 45
- Use the duplex cleaning card 47
- Cleaning the printer rollers 49
- Cleaning the printhead 51
- Advanced Information 55
- Using two printers 59
- Network printing 60
- Printer and PC setup 61
- Change the print ribbon 65
- Change the card design 65
- Two-step printing process 66
- Change the printhead 67
- Change printhead settings 67
- Changing operational settings 68
- • Printer values 69
- • Printing intensity 69
- Troubleshooting 70
- Problems with card appearance 71
- Obtaining service 78
- Safety and compliance 81
- Acknowledgments 83
- Supplies and cards 84
- Supply roll storage 85
- Card specifications 85
- Card size 86
- Card material 86
- New cards preferred 86
- Pre-punched cards 87
- Card quality guidelines 87
- Cleaning supplies 88
- Printer driver diskettes 89
- Anti-static wrist strap 89
- Printer components 90
- Power cord 91
- Smart card serial cable 91
- Print ribbon cartridge 92
- Card cartridge 92
- PC settings 94
- Setting port values 96
- Setting printer permissions 96
- Set printer permissions 97
- PC settings for Windows 98 99
- Magnetic stripe encoding 103
- NTT character set 104
- Select printer 105
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.352 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern