DataCard ImageCard Select Betriebsanweisung PDF herunterladen (Seite 24)

2-10

Getting started

User’s Guide for Express™ and Select™ Class Printers

4 If you are installing the print ribbon for the first time be sure to print a printer test

card after installing the printer driver. (See “Making and evaluating test cards” on

page 2-15 for more information.)

Set the print ribbon type or select autodetect. See “Working with printer settings

and data” on page 3-1 for steps to follow.

♦

Powering on the system

Before installing the printer driver and before using the printer, follow these steps to

power on the printer.

Power on the printer

1 Make sure cards and all other supplies are loaded. See other sections of this

chapter for more information.

2 Remove any printed or rejected cards from the output stacker. See “Removing

cards” on page 3-9 for more information.

3 Make sure the power cord and interface cable are connected. If needed, see

“Connecting the printer” on page 2-4 for more information.

4 Press the printer Power button to turn on power. Observe the printer panel light.

See “Printer features” on page 1-4 for more information. The printer initializes all

components and makes audible sounds.

Figure 2-11: Turn on power to the printer

5 Press the PC Power button to turn on the power to the PC. Turn on power to any

other equipment needed.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 109 110

Keine Kommentare

DataCard ImageCard Select Betriebsanweisung Seite 24