DataCard ImageCard Select Betriebsanweisung Seite 25
- Seite / 110
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Getting started
2-11
User’s Guide for Express™ and Select™ Class Printers
The PC can be powered on before the printer; however, you should wait a few
minutes for the PC to obtain information from the printer. The PC power can also
remain on if the printer is powered off.
♦
Installing the printer driver
The Express or Select printer comes with different printer drivers for the Microsoft
Windows 95/98 and Windows NT operating systems. The printer driver is shipped with
the printer on diskettes.
If you have installed an Express or Select class driver and want to update to the
most recent printer driver, see “Reinstalling the printer driver” on page 5-1.
Installing the Windows 95/98 printer driver
To install a second printer driver of the same class on a PC running Windows 95/
98, see “Installing two printers (Windows 95/98)” on page 5-5. (You cannot install
a second printer driver on a PC running Windows NT.) Do not install two printer
drivers unless you have connected two printers to the PC.
Install the printer driver on Windows 95/98
A PC running Windows 95/98 automatically detects new hardware at PC power
on. If you power off the PC, attach the printer and power it on, and then power the
PC back on, the PC displays a message asking if you want to install the new
printer. Begin with step 6 below.
1 Make sure the printer is connected to the PC and powered on.
2 Close all applications. Do not close Windows.
3 Insert the first Windows 95/98 printer driver diskette into the disk drive of the PC.
4 Select Settings and then Printers from the Windows Start menu. The Printers
window appears.
5 In the Printers window, double-click on the Add Printer icon.
6 When the Manufacturers list appears, select the Have Disk button. If needed, click
on the Browse button to select the printer driver diskette location.
7 Select the port to which you have connected the printer.
8 In the Printer Name box, use the default name or change the printer name to
match the name on the front of your printer. For example, you might change
“Datacard Select Class” to “ImageCard S2” or “UltraGrafix S”. Do not use the <>:"/
\ and | characters in the name.
9 Remove the diskette and insert the next diskette when prompted.
i
E
i
i
i
- ImageCard® and 1
- UltraGrafix® Series 1
- User’s Guide for 1
- Express™ and Select™ 1
- Class Printers 1
- Liability statement 2
- Regulatory compliance 2
- Trademark acknowledgments 2
- Proprietary Notice 2
- Contents 3
- Overview 6
- About this manual 7
- Audience 7
- Printer features 9
- Front of the printer 10
- Inside the printer 11
- Back of the printer 13
- Getting started 15
- Selecting the site 16
- Unpacking the printer 17
- Who to call for assistance 18
- Connecting the printer 18
- Loading cards 20
- Loading the print ribbon 21
- Ribbon take-up 22
- Ribbon supply 22
- Load the print ribbon 23
- Powering on the system 24
- Installing the printer driver 25
- Setup tips 28
- Make a Printer test card 29
- Printer test card 30
- Print the Windows test page 31
- Microsoft 32
- Using the printer 33
- Use the Properties dialog box 34
- Using the Status Monitor 37
- Exiting the Status Monitor 39
- Making cards 40
- Removing cards 41
- Responding to messages 42
- Shutting down the system 43
- Maintaining the printer 45
- Use the duplex cleaning card 47
- Cleaning the printer rollers 49
- Cleaning the printhead 51
- Advanced Information 55
- Using two printers 59
- Network printing 60
- Printer and PC setup 61
- Change the print ribbon 65
- Change the card design 65
- Two-step printing process 66
- Change the printhead 67
- Change printhead settings 67
- Changing operational settings 68
- • Printer values 69
- • Printing intensity 69
- Troubleshooting 70
- Problems with card appearance 71
- Obtaining service 78
- Safety and compliance 81
- Acknowledgments 83
- Supplies and cards 84
- Supply roll storage 85
- Card specifications 85
- Card size 86
- Card material 86
- New cards preferred 86
- Pre-punched cards 87
- Card quality guidelines 87
- Cleaning supplies 88
- Printer driver diskettes 89
- Anti-static wrist strap 89
- Printer components 90
- Power cord 91
- Smart card serial cable 91
- Print ribbon cartridge 92
- Card cartridge 92
- PC settings 94
- Setting port values 96
- Setting printer permissions 96
- Set printer permissions 97
- PC settings for Windows 98 99
- Magnetic stripe encoding 103
- NTT character set 104
- Select printer 105
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.045 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern