DataCard LM200 Betriebsanweisung PDF herunterladen (Seite 24)

18 SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide

Print cards using ID software

1 Follow the instructions for the ID software to capture, format, and

save the data for the card.

2 In the software, send

cards to the printer

(usually, use the Print

button).

3 The printer driver

receives data for each

card, prepares the

card for printing, and

sends each card to the

printer.

Print from a PC application

1 Use the page setup feature in the application to set the following:

— Set paper or page size to CR80 card or 2.125" x 3.375"

— Set the orientation for the card design – either portrait or

landscape.

— Set margins to zero for edge to edge printing.

2 Format and save the card information.

3 Select the SR-CP U1 printer from the Print dialog box. SR-CP U1 is

the default name of the printer. Your printer may have a different

name.

4 Click the Properties button to open the Printing Preferences dialog

box. Use the Setup, Print, and Encode tabs to set printer properties.

Setup tab

Use the Setup tab to set the

card orientation, number of

copies, and whether to reverse

the card.

Print tab

Use the Print tab to set printing

on one side or both sides, and

rotation. The Print tab contains

settings for using the color

(YMC) and black (K) panels of

the print ribbon. The tab also

contains controls for color

adjustment, setting up a look-

up table, and specifying the

print area for ribbon panels,

including peel-off areas.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 108 109

Keine Kommentare

DataCard LM200 Betriebsanweisung Seite 24