DataCard LM200 Betriebsanweisung PDF herunterladen (Seite 52)

42 Printer and Laminator Settings

Printer Setting Tab

ThePrinterSettingtabdisplays:

 Controlsforviewingorchangingprintsettings:

 YMCInkPrintLevel.Setstheprintdensityforcolor

printing.Selectfromsevengradationsfrom‐3

(lighter)to+3(darker).

 ResinKInkPrintLevel.SetstheKresininkprint

density.Selectfromsevengradationsfrom‐3(lighter)

to+3(darker).

 UVInkPrintLevel.Selectfromsevengradationsfrom

‐3(lighter)to+3(darker).

 PeelOffInkPrintLevel.Selectfromsevengradationsfrom‐3(lighter)to+3(darker).

 ResinKInkPrintMode.SetstheKresininkprintquality.IfFineisselected,theprint

qualityimprovesbuttheprintingspeedisslower.ChangetoFineif thinlinesorsmall

blacktextisblurredonthecards.

 MGPeelMode.SelectMGStripefortheprintertousepeeloffribboninthemagnetic

stripearea(ifinstalled).

 StandbyMode.Pausesthecardafterprintingandbeforetransferringthecardtothe

laminator.

 BackSideCooling.SelectEnabletocoolthecardwhenprintingonbothsidesofthecard.

 Controlsforviewingorchangingmagneticstripesettings:

 NumberofRetry .Setsthemaximumnumberofretrieswhenwritingorreadingmagnetic

stripedatafails.Defaultvalueis1.

 ISOMode.Setsthepowerusedbythemagneticcardencoder.ThedefaultisHi‐Co.

 JISMode.Setsthepowerusedbythemagneticcardencoder.ThedefaultisHi‐Co.

 Controlstosetpowersavingcapabilities:

 PowerSavingInterval:Selecttheintervaltowaituntilpowersavingtakeseff ectandthe

printergoestosleep.SelectOfffornetworkoperationorselectfrom5to60minutesfor

aUSBconnection.ThedefaultisOff.

 HRControl:SelectEnabletolowerthetemperatureoftheretransferheatrollerwhen

printingisnotperformedfor30minutesorlonger.Whenenabled,heatroller

Whentheprintergoesintopowersavemode,SleepingdisplaysontheLCDpanel.

Tocancelpowersavemode,pressResetandthenthe(Return)key.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 137 138

Keine Kommentare

DataCard LM200 Betriebsanweisung Seite 52