DataCard LM200 Betriebsanweisung PDF herunterladen (Seite 104)

94 Error Recovery and Messages

Changing the Left-to-Right Position

UsetheStatusMonitortochangetheleft‐to‐rightpositionofthepatchonthecard.Referto

“LaminatorTab”onpage 47tousetheFilmPositionsetting.

Usethefollowingstepstochangetheleft‐to‐rightpatchposition:

1. OpentheStatusMonitoronthePCandselectthe

Laminatortab.

2. MovethesliderinthePositionboxtoadjustthepatch

positionleftorrightforeitherthetop‐sideorbottom‐

sidefilmcartridge:

 Movingtheslidertotheleftmovesthepatchtothe

leftsideofthecard.

 Movingtheslidertotherightmovesthepat chtotherightside

ofthecard.

3. ClickUpdatetoupdatethelaminatorsettings.

4. Laminateacardtoverifythenewpatchposition.

Correcting Card Warping

Whenlaminatedcardswarp,theoptionalprinterbendremedycancorrecttheproblem.Referto

“BendRemedyTab”onpage 44.

Ifabendremedyoptionisnotpresent,lowerthelaminatingtemperatureorincreasethe

laminatingspeedtohelpreducecardwarping.Referto“LaminatorTab”onpage 47tochange

these

settingsusingtheStatusMonitor.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 137 138

Keine Kommentare

DataCard LM200 Betriebsanweisung Seite 104