
Maintaining the printer 4-9
User’s Guide for Select™ Platinum Series™ Printers
• Click the Clean Printer button in the Printer Toolbox. Click OK on the
prompt that appears. Do not insert a cleaning card! The driver sends a
command to the printer to run the printer cleaning card. The printer moves
rollers when it attempts to pick the card.
• Turn the card advance knob to move rollers by hand.
d Move the pen on the roller.
e Lightly wipe any dirt from the end of the cleaning pen onto a clean cloth or
paper. Move the cleaning pen to another area of the roller.
f Repeat steps c through e for the roller at location 4 until no more dirt appears
on the pen or cloth.
5 Close the printer cover.
6 Replace the card cartridge.
If the printer has a locking card cartridge, lock the cartridge after replacing it.
7 Print a card to verify the quality of printing. You can print a printer test card, a
sample card, or a card using your card creation application.
♦
Using the duplex cleaning card
If your printer includes a duplex module, use the duplex cleaning card to maintain card
quality and reduce the likelihood of jammed cards in the duplex module.
Use the duplex cleaning card once a month or when problems occur, such as
repeated card jams. See “Supplies and cards” on page B-1 for ordering information.
Use the duplex cleaning card
If the printer has a locking card cartridge, unlock the cartridge before removing it.
1 Remove the card cartridge and set it aside.
If the print ribbon sticks to the duplex cleaning card, remove the print ribbon
and repeat this procedure with a new cleaning card.
2 Peel the middle strip of protective paper from both sides of the duplex cleaning
card (see Figure 4-9).
The outside protective paper strips must stay on the card.
Figure 4-9: Duplex cleaning card
E
i
i
i
Keep
Remove
Keep
Kommentare zu diesen Handbüchern