DataCard ImageCard Select Betriebsanweisung PDF herunterladen (Seite 24)

2-8 Using the printer

User’s Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers

Making cards

This section describes several ways to make cards using the Select printer.

• Usually, cards are sent from a card creation application, such as Datacard’s ID

Works™ which captures, organizes, and formats the information on the card. A

card creation application is specially designed software that handles the types of

information used on cards. See “Use a card creation application” for the steps to

follow.

• If you do not have a card creation application, you can use another PC application

to format the information to print on cards. If you are encoding magnetic stripe

data, be sure to use an application in which you can save the result and edit it

again, such as Windows WordPad™ or Word. See “Print from a PC application”

for the steps to follow.

With any application, test your card design to verify the results.

Use a card creation application

1 Follow the instructions for the card creation application to capture, format, and

save the data for the card.

Steady green

The printer is ready and waiting to print cards.

Blinking green

The printer is busy printing cards.

Steady amber

The printer is paused without an error.

Blinking amber

The printer has issued a message. See the PC

for the message.

Steady red

The printer has a problem that requires service.

Off

The printer power is off.

#. If the light blinks amber but no message appears on the PC, the

following might have occurred:

* You used the Power-on/Ready sequence to print a test card.

Messages are not reported.

* You changed the name of the printer. Remove and re-install the

printer driver to change the printer name.

Status Light Description

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 153 154

Keine Kommentare

DataCard ImageCard Select Betriebsanweisung Seite 24